This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. ZD10-100 New upgrade4.0 - Sensor + Test
When pressure, weight, or a physical bend is applied to the active sensing area, the conductive layers are forced together.
The ZD10-100 is a resistive-based, thin-film pressure sensor. Its fundamental operation relies on the principle that the sensor's resistance decreases as pressure applied to the active sensing area increases. This unique pressure-resistance relationship allows for accurate pressure detection, making it an excellent choice for converting force into analog signals for microcontroller systems. Flexible Thin Film Pressure Sensor Form Factor: Low-profile, flexible, and bend-resistant 2. ZD10-100 Technical Specifications (Datasheet Summary)
While the is comprehensive, seasoned engineers note these unwritten behaviors:
(e.g., 10kΩ or 100kΩ) from the analog pin to GND. Working Principle:
Vout=Vcc×(RFIXRSENSOR+RFIX)cap V sub out end-sub equals cap V sub cc end-sub cross open paren the fraction with numerator cap R sub FIX end-sub and denominator cap R sub SENSOR end-sub plus cap R sub FIX end-sub end-fraction close paren Choosing the correct value for RFIXcap R sub FIX end-sub
The sensor generally features two electrical wires. The resistance between these two wires changes when the sensor is either bent or subjected to force. 2. Key Specifications and Technical Parameters
Wire a stationary pull-down resistor (such as a standard 10k Ωcap omega Ωcap omega