: Inspect the extension cables regularly for fraying. If you ever need to replace them, parts are often sourced through FitnessRepairParts.com or Sears Parts Direct .
: Attach the top bar to the two main posts using pre-threaded holes and bolts.
Secure the top of the chrome guide rods into the brackets on the top crossbar. Step 4: Seat and Bench Mechanism
Keep all nuts and bolts "finger-tight" during the frame assembly. Only torque them down fully once the entire structure is aligned.
Slide the dual-action handlebars onto the pivot axles at the base of the mast.
Bolt the and Backrest Pad to the support structure using the smaller machine screws. Do not over-tighten, as this can strip the internal wooden threads.
I can provide or troubleshooting tips for any part of the build. Share public link
If you need specific replacement parts like cables or belts, you can find diagrams and listings on sites like Sears PartsDirect or Fitness Repair Parts . Do you have all the (bolts/nuts), or Official Lifestyler 15666-DUAL TRACK 20 weight system parts
The base frame provides the foundation for the entire machine. It must be perfectly flat and stable.
| Part | Quantity | Description | |------|----------|-------------| | Base stabilizer (front) | 1 | Long, with rubber feet | | Base stabilizer (rear) | 1 | Shorter, with weight stack footprint | | Left vertical upright | 1 | Marked “L” near bottom | | Right vertical upright | 1 | Marked “R” near bottom | | Top crossmember | 1 | Contains upper pulleys | | Pull-up bar | 1 | Knurled or rubberized grip | | Weight plate holders (if selectorized) | 2 | Chrome posts |
Attach the swinging pieces, ensuring bolts are screwed on evenly so the component sits correctly on the main rod, leaving even gaps for smooth movement.
Insert the rubber floor caps onto all four corners of the stabilizers. Step 2: Vertical Uprights and Weight Stack Guide Rods
: Inspect the extension cables regularly for fraying. If you ever need to replace them, parts are often sourced through FitnessRepairParts.com or Sears Parts Direct .
: Attach the top bar to the two main posts using pre-threaded holes and bolts.
Secure the top of the chrome guide rods into the brackets on the top crossbar. Step 4: Seat and Bench Mechanism
Keep all nuts and bolts "finger-tight" during the frame assembly. Only torque them down fully once the entire structure is aligned. dp dual trac 20 assembly instructions full
Slide the dual-action handlebars onto the pivot axles at the base of the mast.
Bolt the and Backrest Pad to the support structure using the smaller machine screws. Do not over-tighten, as this can strip the internal wooden threads.
I can provide or troubleshooting tips for any part of the build. Share public link : Inspect the extension cables regularly for fraying
If you need specific replacement parts like cables or belts, you can find diagrams and listings on sites like Sears PartsDirect or Fitness Repair Parts . Do you have all the (bolts/nuts), or Official Lifestyler 15666-DUAL TRACK 20 weight system parts
The base frame provides the foundation for the entire machine. It must be perfectly flat and stable.
| Part | Quantity | Description | |------|----------|-------------| | Base stabilizer (front) | 1 | Long, with rubber feet | | Base stabilizer (rear) | 1 | Shorter, with weight stack footprint | | Left vertical upright | 1 | Marked “L” near bottom | | Right vertical upright | 1 | Marked “R” near bottom | | Top crossmember | 1 | Contains upper pulleys | | Pull-up bar | 1 | Knurled or rubberized grip | | Weight plate holders (if selectorized) | 2 | Chrome posts | Secure the top of the chrome guide rods
Attach the swinging pieces, ensuring bolts are screwed on evenly so the component sits correctly on the main rod, leaving even gaps for smooth movement.
Insert the rubber floor caps onto all four corners of the stabilizers. Step 2: Vertical Uprights and Weight Stack Guide Rods
