Specifies technical delivery conditions for fasteners with electrolytically applied metallic layers (electroplating) to ensure corrosion protection and proper thread fit. Current Status: Withdrawn/Superseded. For modern projects, it is typically replaced by (Fasteners — Electroplated coating systems). Relationship to Other Standards:
(Fasteners — Electroplated coating systems) is the direct modern equivalent. Related Standards: It often works alongside (for thread tolerances) and (for chromate treatments).
The simplest and safest approach is to understand that for any modern requirement, you should search for instead. This standard is available for purchase from many authorized distributors, and it is the globally recognized, legally valid document.
| Part | Title | Current Status | |------|-------|-----------------| | Part 1 | General requirements for screws and nuts | Superseded by DIN ISO 8992 | | Part 2 | Surface roughness for product classes A and B | Superseded | | Part 3 | Mechanical property classes conversion | Superseded by DIN ISO 898-1 | | Part 4 | Mechanical properties for nuts | Superseded by ISO 898-2 | | Part 5 | Acceptance inspection | Superseded by DIN EN ISO 3269 | | Part 6 | Finishes and tolerances for product grade F | Withdrawn | | | Electroplated coatings | Superseded by ISO 4042 | | Part 11 | Stainless steel fasteners | Superseded by DIN EN ISO 3506 | | Part 13 | High/low temperature properties | Superseded | | Part 19 | Surface discontinuities (screws) | Superseded by ISO 6157-1 | | Part 20 | Surface discontinuities (nuts) | Superseded by DIN EN ISO 6157-2 | | Part 21 | Surface discontinuities (nuts, additional) | Superseded by DIN EN ISO 10484 | | Part 27 | Adhesive-coated fasteners | Withdrawn (2023) | | Part 28 | Locking coating fasteners | Current | | Part 30 | Thread rolling screws, class 10.9 | Current | din 267 part 9 pdf
Introduces advanced process controls and risk assessment frameworks
Included warnings and precautions for high-strength fasteners (hardness >400 HV) to avoid "brittle fracture" caused by the plating process.
While many manufacturers still refer to DIN 267-9, it has largely been superseded by international standards to unify global engineering practices. Фикс Трейд as an active DIN standard. Primary Replacement: This standard is available for purchase from many
| Code | Minimum Thickness (μm) | Notes | |------|----------------------|-------| | 0 | – | For threads below M1.6 | | 1 | 3 | | | 2 | 5 | | | 3 | 8 | | | 4 | 12 | | | 5 | 15 | | | 6 | 20 | | | 7 | 25 | Not for threaded components | | 8 | 32 | Not for threaded components | | 9 | 40 | Not for threaded components |
DIN 267 Part 9 is widely used in various industries, including:
Since the standard is withdrawn, official copies are often found through archive services or specialized engineering libraries: Official Purchase: commonly known as DIN .
Engineers looking for the "DIN 267 part 9 pdf" should note the status of this standard within the global transition toward international standardization. DIN 267 Part 9 has been largely superseded by international standards to ensure cross-border manufacturing consistency.
A copy of DIN 267 Part 9 can be obtained from the Deutsches Institut für Normung (DIN) website or from a authorized distributor. The standard is available in PDF format, which can be easily downloaded and shared.
The standard was published by the German Institute for Standardisation (Deutsches Institut für Normung) , commonly known as DIN .