The camera supports both automatic and manual exposure, which is crucial for soldering work.
When routed via a USB interface to a computer, the physical controls on the device are locked out. The software control transitions fully to the host computer:
Like any software, the HY-2307 camera software may encounter issues from time to time. Here are some common problems and solutions:
Design note: Abstract hardware via a HAL so higher layers use a uniform API regardless of sensor specifics. hy-2307 camera software
The HY-2307 typically requires on Windows 10/11, macOS, or Linux (UVC compliant).
Features an instant digital Freeze/Thaw command to lock real-time inspections in place for study. 💻 3. Host Computer Software Solutions
Direct recording onto a MicroSD / TF card (up to 32GB or 128GB depending on firmware). The camera supports both automatic and manual exposure,
Center reference points that can be locked or moved.
4.4 Calibration
To understand the software capabilities, it is crucial to look at how it communicates with the underlying Hayear HY-2307 hardware: Model: HY-2307 - Banggood Here are some common problems and solutions: Design
Ensure the lens cap is removed. Check if the camera is set to USB mode rather than HDMI output mode using the remote control menu. Verify that the camera is plugged into a functional USB port. The Live Video Feed Stutters or Lags
: While the camera can capture up to 16MP snapshots via HDMI to a TF card, the USB output to a PC is typically limited to 1080p at 60fps (or 2MP in some variants). PC Recognition : If the software doesn't see the camera, check your PC's Device Manager
If the computer does not recognize the camera, open Device Manager (Windows) and check for issues under "Imaging Devices." You may need to manually select the "USB Video Device" driver.
. You may need to delete the generic "USB Camera" entry under "Imaging devices" and rescan so the system identifies it specifically as "HY-2307". within the S-EYE software?
The HY-2307 is often marketed as an "OEM" product. Specific software interfaces may vary slightly depending on the final reseller or the specific sensor version (e.g., Sony IMX vs. OmniVision sensors) mounted on the board. This report covers the standard reference software architecture.