Ocpp-809 Driver Upd Jun 2026

Built entirely on standard EPSON ESC/POS command structures.

Follow these steps to install the OCPP-809 printer on your Windows machine:

Loose cable connection or wrong USB port configuration in Windows.

Choose POS-80 or 80mm Series from the list of device profiles. Set up the Port:

Connect the power cable to the OCPP-809 and plug it into an electrical outlet. ocpp-809 driver

: After installation, select "YES" to print a test page to confirm the driver name and successful communication.

The OCPP-809 is a high-speed, reliable 80mm thermal receipt printer widely used in retail, catering, and logistics. Manufactured primarily by Ocom Technologies, it supports multiple interfaces like USB, Serial, and Ethernet. To communicate effectively with your computer or POS terminal, it requires a specific device driver that translates print commands from your software into physical receipts. 2. Where to Download the Official OCPP-809 Driver

You can download the latest software and manuals from the official OCOM Technologies Download Page . Look for the "80MM Thermal Printer Driver & Tools" package. OCPP-809 80mm Thermal Receipt Printer

| IEC 104 Concept | OCPP 1.6 / 2.0.1 Mapping | |----------------|---------------------------| | M_ME_TF_1 (measured value, scaled, with timestamp) | MeterValues.req (active import energy) 鈫� convert to instantaneous power (kW) | | C_CS_NA_1 (setpoint command, normalized) | SetChargingProfile.req 鈥� limit power (kW) or current (A) | | C_CI_NA_1 (interrogation command) | GetCompositeSchedule.req (OCPP 2.0.1) or cache state | | M_SP_NA_1 (single point status 鈥� e.g., circuit breaker) | StatusNotification.req (connector status) | | C_SE_NB_1 (select-execute for protection) | Not directly in OCPP; implement as precondition for large limit changes | | Spontaneous events (e.g., overload) | NotifyEvent.req (OCPP 2.0.1) or custom vendor extensions | Built entirely on standard EPSON ESC/POS command structures

Click Adding Printers and Classes and add the detected OCPP-809 device.

The term 鈥�809鈥� colloquially refers to the Chinese standard DL/T 634.5104-2009, which is based on IEC 60870-5-104. This article uses 鈥�809鈥� to denote the IEC 104 protocol family in a grid context.

[Printer Properties] 鈹溾攢鈹� [Ports Tab] 鈹�鈹�鈹�鈹�鈹�鈹�鈹�鈹�鈹�鈹�鈹� Select Data Interface (USB001, COM1, or TCP/IP) 鈹斺攢鈹� [Device Settings Tab] 鈹�鈹� Configure Hardware Triggers 鈹溾攢鈹� Cash Drawer 1 (Before/After Printing) 鈹溾攢鈹� Auto-Cutter (Partial/Full Cut per Page) 鈹斺攢鈹� NV Logo Storage (Top of Receipt Branding) 1. Activating the Auto-Cutter

: Choose "80mm Series" or "POS-80" as the printer type. Set up the Port: Connect the power cable

How is the printer (USB, Ethernet, or Serial)? Are you encountering any specific error messages ?

The Series 4 units were old. Not "vintage" old, but "firmware-last-updated-in-2016" old. They spoke JSON, technically, but it was a dialect of OCPP 1.5 that seemed to ignore half the schema. The client wanted these units managed by a modern Central System running OCPP 2.0.1.

: Connect the printer via USB, Serial, or LAN before running the installer.